1.將linux kernel source code放置/usr/src/
2.清除暫存檔輸入指令sudo make mrproper
3.使用menuconfig產生.config，安裝menuconfig指令sudo apt-get install libncurse-dev
4.產生.config指令sudo make menuconfig
5.編譯kernel指令sudo make -j 4 all
6.產生belmage指令ll arch/x86/boot/bzlmage
7.安裝kernel指令make modules_install
8.再輸入make install
9.檢查kernel是否安裝指令ll /lib/modules/
10.重新開機選擇kernel
